Roland JD-800 Waveforms For UDO Synthesizers

Bring the legendary JD-800 sound into your UDO Super 6.

Immerse your UDO Super 6 in the lush, digital character of 16 classic waveforms sampled from the iconic Roland JD-800. These 16-bit, 4096-sample waveforms are perfectly formatted to work seamlessly with your Super 6.

INFUSE YOUR SUPER 6 WITH JD-800 VIBES.

Want to hear how these waveforms compare on a real JD-800 vs. the Super 6? Check out the demo here.

Installation Instructions:

1. Make sure no USB cable is connected to your Super 6.

2. Unlock the patch disk to allow file transfer:

   • Power off the Super 6.
   • Hold down the PATCH button and turn the Super 6 back on, continuing to hold PATCH for 5 seconds.
   • Release the button after 5 seconds.

3. Connect your Super 6 to your computer via USB. You’ll see a disk drive appear (approx. 5.2 MB in size).

4. Backup and replace waveforms:

   • Save the existing waveforms from the Super 6 to your computer.
   • Delete them from the Super 6 disk.
   • Copy the JD-800 waveforms from this download to either the "waveforms" or "alternative waveforms" folder (depending on which one you emptied).
   • If prompted to "copy files without properties," click yes.

5. Power cycle the Super 6 (turn it off and on again).

All set—enjoy your new JD-800 inspired sound palette!

⚠️ Note: These waveforms also work with the Super Gemini and Super 8.